Coil Slitting Line
Home - Products - Coil Slitting Line

Products

Coil Slitting Line

The slitting line is designed to shear hot & cold rolling steel coil of large width into sub-strips of desired width along the longitudinal direction then roll them into coils as the material of forming pipe and sectional steel and other profile.

MESSAGE

Description

The slitting line is designed to shear hot & cold rolling steel coil of large width into sub-strips of desired width along the longitudinal direction then roll them into coils as the material of forming pipe and sectional steel and other profile.

The slitting line is used to match with cutting-into-length machine according to the different requirement of clients.

Main technical parameters

Model Material of strip steel: carbon steel of σb≤580Mpa, σs≤350MPa and low alloy steel of ≤X80 Cutting speed(m/min)
Width of raw material(mm) Thickness of strip steel(mm) Width of finished product(mm)
ZJ600 120~600 0.5~2.0 40~580 10~80
ZJ800 120~800 0.7~3.5 40~750 10~80
ZJ1300 400~1300 0.8~4.5 60~1250 10~60
ZJ1600 600~1600 2.0~6.0 60~1550 10~60
ZJ1800 900~1800 3.0~8.0 90~1750 10~60
ZJ2000 1000~2000 6.0~16.0 90~1950 10~30
ZJ2200 1000~2200 8.0~20.0 90~2150 10~20

Notice: this unit is non-standard product. Parameters table is only for reference. The product can be customized according to users’ needs.

Prev : No more!!
Next : No more!!