What are the maintenance and maintenance of Pipe Mill
? Let's introduce the Pipe Mill manufacturer from Zhonghui.
In the process of use, we must strictly operate according to the operation procedure in the instruction manual, and can not let the equipment run and use overloaded. Before Pipe Mill
is put into production, it must be checked whether each component can work normally.
The external factor in the formation and expansion of the oxide film during the rolling process is the interaction of the shear stress with the compressive stress along the circumferential direction of the roll. There is a phenomenon of forwarding slip and back slip in the rolling zone, and the oxide film on the surface of the roll will be subjected to alternating shear stress along the circumferential direction of the roll when passing through the rolling zone.
In the production process of Pipe Mill
, it is necessary to ensure the temperature of the equipment and the stability of the production condition. If there is a fault, it must be timely and its production will be stopped to check what is wrong with the parts, so as to avoid further losses. The main faults include unstable operation, wear of the machine, and abnormal noise during operation. If problems occur, they should be checked in time.